part number: XDMR06C 8mm (0.32") single digit numeric display oct 17,2016 xdsa0130 v11-x layout: maggie l. p. 1/3 absolute maximum ratings (t a =25c) red (gaalas) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 155 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3-5 seconds package schematics notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subjec t to change without notice. red (gaalas) unit forward voltage (typ.) (i f =10ma) v f 1.8 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission cie127-2007* (typ.) (i f =10ma) p 655* nm wavelength of dominant emission cie127-2007* (typ.) (i f =10ma) d 640* nm spectral line full width at half-maximum (typ.) (i f =10ma) 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c) part number emitting color emitting material wavelength cie127-2007* nm p description min. typ. XDMR06C red gaalas 14000 5600* 36990 9990* 655* common cathode, rt.hand decimal. luminous intensity cie127-2007* (i f =10ma) ucd *luminous intensity value and wavelength are in accordance with cie127-2007 standards. features low power consumption robust package i.c. compatible standard configuration: gray face w/ white segments optional black face provides superior color contrast rohs compliant attention observe precautions for handling electrostatic discharge sensitive devices a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/jesd625-a and jedec/j-std-033)
part number: XDMR06C 8mm (0.32") single digit numeric display oct 17,2016 xdsa0130 v11-x layout: maggie l. p. 2/3 ? red remarks: if special sorting is required (e.g . binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. red
part number: XDMR06C 8mm (0.32") single digit numeric display oct 17,2016 xdsa0130 v11-x layout: maggie l. p. 3/3 packing & label specifications terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp ?
|
